Changes

A dead-end siding which is accessed by a two-lever [[Eardington ground frame | ground frame]] at the south end. This is released by the [[Highley signal box|Highley]]-[[Bridgnorth signal box|Bridgnorth]] long section token, and was commissioned in 1976<ref>[http://svrsig.co.uk/svr/Frame8.htm Severn Valley Railway S&T Department (unofficial) website.]</ref>. The siding had been removed by BR in 1964 after closure of the line, but was reinstated in the early days of the SVR. In 1973 under Sir Gerald Nabarro's chairmanship, the siding was converted by contractors to a run-round loop at the then not insignificant cost of £8,000. This was seen as part of the plan to abandon Bridgnorth, which led to much unrest on the SVR at the time. In fact the connection at the north end would have been too tight for most locomotives, and was soon removed.<ref name=Marshall180/>

The original siding at Eardington had been removed by BR in 1964 after closure of the line, but was reinstated in the early days of the SVR. In 1973 under Sir Gerald Nabarro's chairmanship, it was converted by contractors into a run-round loop at the then not insignificant cost of £8,000. This was seen as part of the plan to abandon Bridgnorth, which led to much unrest on the SVR at the time. In fact the connection at the north end would have been too tight for most locomotives.<ref name=Marshall180/> By winter 1974-5 the loop had been converted to a siding to for PW use. The two points at the north end which formed a crossover were both removed; the former point in the main line was reused at [[Arley]] while the point from the loop was taken to Bridgnorth for use in the loco yard. The single-bladed trap at the south end was not considered suitable for a siding opening onto a passenger carrying line, so was replaced by a double-bladed trap.<ref>SVR News 34</ref> Since that time the siding is regularly used for storing Permanent Way rolling stock.