Changes

[[File:{{Infobox steam loco|image = MW2047_20091031.jpg |thumbcaption = 2047 Warwickshire|300pxconstruc = Manning, Wardle & Co|rightwheels = 0-6-0| status = Out of service|locono = Works No 2047 ‘Warwickshire’|othernos = |designed = Manning, Wardle & Co|locotype = |built = 1926|years1 = 1967|events1 = Arrived on SVR|years2 = 1968|events2 = First steamed|years3 = 1979|events3 = Last steamed|length = 25ft 0"|weight = 25t|power = 12,695 lb|pressure = 160 lb/sq in}}Manning Wardle [[Whyte notation | 0-6-0ST]] Works No 2047, built in 1926, was the last locomotive to be built by Manning Wardle before the Company closed due to the post World War One recession. It was assembled using standard parts from various other classes, but is visually similar to the standard Manning Wardle "Q" class.<ref>Heritage Railway Magazine 17 September 2017 describes it as an N Class.</ref> The boiler was constructed using an antiquated lap joint design rather than butt joints which had become the norm for railway locomotive boilers by that time.<ref>[[Bibliography#Books | Shaw (1998)]]p. 45.</ref> 

Manning Wardle [[Whyte notation | 0-6-0ST]] Works No 2047, built in 1926, was the last locomotive delivered to be built by Manning Wardle before the Company closed due Rugby Portland Cement Co Ltd (RPC) at their New Bilton Works near Rugby on 9 August 1926. It remained there throughout its working life apart from a brief move to the post World War One recessionRPC’s nearby Southam Cement Works during 1943.  In 1954 2047 received a new inner firebox and other major firebox repairs. It The locomotive was assembled using standard parts finally withdrawn from various other classes, but is visually similar to the standard Manning Wardle "Q" classuse in December 1966.<ref>[[Bibliography#Books | Shaw (1998)]] p. 49.</ref>

<gallery>File:S0702_2047_Oct67_D_Cooke.jpg | 2047 worked for the at Rugby Portland Cement Co Ltd in 1967 at their New Bilton Works until being withdrawn from use in 1966. the time of purchase by the SVR (D Cooke)</gallery>

Purchased by Following withdrawal, RPC offered the locomotive to the Warwickshire Railway Society. A separate group, the [[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]]was formed and the necessary funds raised by a share issue (£150 for the locomotive and £150 for transport and spares). After an inspection was carried out in July 1967, 2047 was purchased and arrived on the Severn Valley Railway in October on [[Severn Valley Railway Timeline 1965-1969#1967 | 22 October 1967]]. <ref>[[Bibliography#Books | Shaw (1998)]] p. 51.</ref> It  <gallery>File:Warwickshire move 1.jpg|2047 being loaded at RugbyFile:Warwickshire move 2.jpg|2047 on the trailerFile:Warwickshire move 3.jpg|2047 en routeFile:Warwickshire move 4.jpg|2047 on the trailerFile:Warwickshire move 5.jpg|2047 en routeFile:Warwickshire move 6.jpg|2047 being unloaded at Bridgnorth</gallery> ===First boiler ticket===The locomotive was named first steamed on 21 December 1968<ref>[[Bibliography#Books|Williams (1974)]] p. 6.</ref> and initially finished in an unlined pale blue livery. Black and white lining and "Warwickshire" name plates were later applied in time for a planned naming ceremony in 1970, although this had to be re-arranged and was eventually carried out on 3 April 1971 by Mr H A Vigar, the former manager of RPC’s New Bilton Works.<ref>[[Bibliography#Books | Shaw (1998)]] p. 52-53.</ref>  <gallery>File:S0724_2047_Dec68_D_Cooke.jpg | First steaming in December 1968 (D Cooke)</gallery> In August 1974, 2047 attended the Town and Country Fair at Stoneleigh. For the occasion the locomotive was repainted in a ‘Caledonian Railway’ lined blue livery and, with the consent of the Lord Lieutenant of Warwickshire, the Warwickshire Crest (the ragged bear and staff) was hand painted on the cab sides. The locomotive was confined to a short demonstration track only 40 feet in length, but managed to accumulate 8&frac12; miles in the course of giving 2,500 footplate rides.<ref>[[Bibliography#Books | Shaw (1998)]] p. 54.</ref> ===Second boiler ticket and boiler failure===In 1975 2047 was withdrawn for the boiler to be retubed. It returned to service in 1977, being mainly used on works trains at Arley. In December of that year a leaking fusible plug was discovered and the locomotive was again withdrawn. Although this would normally be expected to be a simple fix, a series of delays followed, mainly due to the lack of available boilersmith resources and the relative low priority of a locomotive not used on passenger services. By 1983 only a brief examination had been carried out which determined that the failed plug was not a BR standard size. A more detailed inspection in 1984 determined that the inner firebox fitted in 1954 had become very thin and would require considerable work; also the smokebox, smokebox door and ashpan would need to be replaced and the boiler retubed again.<ref>[[Bibliography#Books | Shaw (1998)]] p. 55.</ref> By 1988 the work had still not been carried out, and work on other boilers was being delayed while the new Bridgnorth boiler shop was built. The WILPG therefore sent the boiler from 2047 Warwickshire to Pridhams for overhaul. By August 1989, a report had been received confirming that the thickness of the boiler plate was below the acceptable level for further use and that repairs would not be economical. In addition, the use of the lap joints (see below) would potentially make the boiler uninsurable even if it was repaired. In June 1992 it was agreed to return the boiler so that 2047 could be cosmetically restored and placed on static display at [[Kidderminster Railway Museum]]. In November 1993, the WILPG formed the Warwickshire Industrial Locomotive Trust to raise funds for building a new boiler. The cosmetic overhaul was completed in June 1995, included repainting into the original RPC green livery. After a period on display at Hampton Loade, 2047 was put on display outside Kidderminster Railway Museum on 15 February 1997.  Mileage recorded during the first and second boiler tickets as report in SVR News was as follows:{| class="wikitable"|-! <b>Year</b> !! style="text-align:right;" | <b>Mileage</b> |-| 1971 || style="text-align:right;" | 196|-| 1972 || style="text-align:right;" | 182|-| 1973 || style="text-align:right;" | 76|-| 1974 || style="text-align:right;" | 82|-| 1975 || style="text-align:right;" | 20|-| 1976 || style="text-align:right;" | 0|-| 1977 || style="text-align:right;" | 260|-| <b>Total</b> || style="text-align:right;" | 816|} Note: The locomotive was first steamed in 1968 as recorded in David Cooke's photograph above. However none of the cumulative mileage tables in SVR News show any mileage before 1971.

===Current status===The long awaited overhaul of 2047 began in with a move to Bridgnorth in November 2010. In 1989 the WILPG sent 2013 quotations between £61,390 and £101,433 were obtained for the new boiler with an estimate of overhaul cost from 2047 Warwickshire to Pridhams for overhaul. It soon transpired that the thickness SVR of the boiler plate was below the acceptable level for further use£184,306.<ref>[https://davidncooke686.jimdo. Circa 1994com/7-wilt-registered-charity-no-1041723/ 'WILT' page, David Cooke's website] (retrieved 17 February 2018)</ref> The overhaul progressed at [[Bridgnorth Loco Works]], with re-wheeling taking place in December 2018. A number of smaller components were moved to [[Bewdley]] and on 25 November 2018 the WILPG formed the Warwickshire Industrial Locomotive Trust to raise funds for building a new original boiler, with 2047 being cosmetically restored smokebox and placed saddle tank were moved there on static display at [[Kidderminster Railway MuseumGWR 42343 Machinery Flat|Loriot N 42343]] in . On 28 March 2019 the meanwhilelocomotive chassis was moved by [[BR Class 33 33108]] from Bridgnorth to [[Bewdley Down Yard]] for restoration to continue.

After arrival at Bewdley, the cab roof and sides were removed in October 2019 and brake gear was re-fitted to frames in November 2019. New bufferbeam profiles were delivered in early 2020. {{As of|20162021|0103}} an order for the locomotive new boiler is undergoing an overhaul at the [[Bridgnorth Loco Works]]anticipated to be placed in mid-2021 with delivery due in 2023/24. 2047 was shunted under cover on 30 March 2021, although there are plans to continue talking the restoration at place formerly occupied by [[Bewdley4150|GWR Large Prairie 4150]].<ref>[http://wilt.jimdo.com/trust7d-mw2047-restoration-newsprogress/ WILT Restoration page]</ Latest News ref> Pictures of progress can be seen on the [http://wilt.jimdo.com/7d-mw2047-restoration-progress/ Warwickshire Industrial Locomotive Preservation Trust web site2047 restoration page].  <gallery>GWR 43243 2047 20180714.jpg|Saddle tank, smokebox and boiler</refgallery>  ==Boiler lap joints==The saddle tanks for 2047 simplified diagram shows the cross section of boilers constructed using a lap joint (left) and butt joint (right). In the former, the metal sheet forming the boiler barrel is rolled beyond a circle and the overlapping edges are secured with two rows of rivets. In the latter, the two edges of the boiler barrel are butted together and outer and inner plates are used to reinforce the join. In the 1989 report, the practice of using lap joints was described as having been ''"proved many years ago to be defective and dangerous and whilst not prohibited in existing boilers, was made subject to very stringent and highly expensive testing procedures"''.<ref>JA Rees, SVR Chief Engineer, cited in [[GWR 813 Saddle TankBibliography#Books | Shaw (1998)]] can be seen stored outside p. 56-57.</ref> The first photograph shows 2047’s old boiler at Bridgnorth in 2016. The ‘haycock’ firebox, so called because of the unusual height, is on the left with the boiler barrel on the right. The lap joint in the latter is secured by the two rows of rivets to the works right. The other photographs show part of a boiler barrel (stood on [[GWR 42343 Machinery Flat]]end) constructed using a butt joint, with the smaller outer plate secured by four rows of rivets and the larger inner plate by a further two rows of rivets.<gallery>File: Boiler_joints.jpg | Illustration of lap joint and butt jointFile: 2047_Boiler_20160713.jpg | Lap joint in 2047’s boiler (right)File: Boiler_butt_joint_external_20160713.jpg | Butt joint (external view) File: Boiler_butt_joint_internal_20160713.jpg | Butt joint (internal view) </gallery>

[[Severn Valley Railway Timeline 1965-1969 | Severn Valley Railway Timeline 1965-1969]]<br>[[Warwickshire Industrial Loco Preservation Group | Warwickshire Industrial Loco Preservation Group]]<br>[[SVR-based locomotives visiting other events]]<br>[[Rolling stock currently under restoration]]

{{SteamNavbox}} [[Category:Locomotives at BridgnorthRolling stock in Bewdley Down Yard]]