File:Floor plate MC.jpg
From SVR Wiki
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 1,024 × 768 pixels.
Original file (1,024 × 768 pixels, file size: 98 KB, MIME type: image/jpeg)
Summary
After cleaning out the rust scale that had lifted the van end by about half an inch, the floor plate was pulled down into its correct position and welded to the headstockThe underframe member across each end of a wagon carrying the buffers and coupling. Known as the Bufferbeam on a locomotive.. Photo Mike Cranmore.
Licencing
The copyright holder has given permission for use of this image on the SVRSevern Valley Railway Wiki.
It may not be used for any other purpose without explicit permission from the copyright holder.
If possible, this image should be replaced by one using a free license.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 20:57, 26 November 2016 | 1,024 × 768 (98 KB) | R Gunning (talk | contribs) | After cleaning out the rust scale that had lifted the van end by about half an inch, the floor plate was pulled down into its correct position and welded to the headstock. Photo Mike Cranmore. |
- You cannot overwrite this file.
File usage
The following page links to this file: