UIC classification

From SVR Wiki
Revision as of 22:11, 3 August 2021 by Robin (talk | contribs) (Examples on the SVR: add former resident classes (hired))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The arrangement of wheels on steam locomotives and small diesel locomotives is normally described using Whyte notation which specifies the number of powered and unpowered wheels, for example 0-6-0 or 4-6-2. This system does not work well for the more complicated arrangements found in large diesel locomotives or multiple units which may have bogies containing both powered and unpowered wheels and/or using single or multiple traction motors or hydraulic transmissions. Their wheel arrangement is therefore normally described using the more flexible UICUnion Internationale des Chemins de fer (International Union of Railways) classification system which denotes the number of axles (as opposed to wheels) and specifies whether each is powered or unpowered.

The international standard UICUnion Internationale des Chemins de fer (International Union of Railways) notation

The international standard UICUnion Internationale des Chemins de fer (International Union of Railways) notation includes the following conventions to describe axles:

  • An upper case letter indicates the number of consecutive driving axles, starting at A for a single axle. Thus a single C would indicate three powered axles, connected by driving rods or gears, all mounted in the locomotive's frame (Whyte notation: 0-6-0), while BB would indicate four powered axles all mounted in the locomotive's frame, driven in pairs (Whyte notation: 0-4-4-0).
  • The lower case suffix o when applied to two or more driving axles denotes that they are individually driven by separate traction motors rather than by a shared traction motor or other power source.
  • A number indicates the number of consecutive non-driving axles.

The presence of bogies is denoted in one of two ways:

  • Where the bogie only contains one type of axle, a "prime sign" (a single quotation mark) is added to the relevant letter(s) to denote that they are mounted on a bogie. Thus Co'Co' denotes a pair of bogies, each with three powered axles individually driven by traction motors.
  • Where the bogie contains several different axle types, Brackets are used to group together letters and numbers describing the same bogie or truck. Thus (A1A)(A1A) indicates two three-axle bogies, each with the outer two axles driven by separate traction motors and an unpowered central axle.

Although not present on the SVRSevern Valley Railway, the UICUnion Internationale des Chemins de fer (International Union of Railways) classification system also describes articulated vehicles (where the inner bogie is shared between two vehicles). So, 2'2'2 is used to describe an articulated pair of unpowered vehicles in the Stadler Class 745 units. Where articulated sets are joined within a unit a plus sign sign is used, thus Bo'2'2+2'2'2.

Commonwealth classification

The UK generally uses a modified version of this notation (sometimes referred to as "Commonwealth classification" or "British classification") where the prime sign (single axle) and brackets (multiple axles per bogie) are replaced by a hyphen denoting the separation between groups of axles in a manner more akin to Whyte notation. Thus B'B' internationally becomes B-B, Bo'Bo' becomes Bo-Bo, (A1A)(A1A) becomes A1A-A1A and so on. The SVRSevern Valley Railway Wiki uses this classification system.

Examples on the SVRSevern Valley Railway

Examples found in diesels currently or formerly resident on the SVRSevern Valley Railway are as follows (formerly resident classes in italics):

Commonwealth classification UICUnion Internationale des Chemins de fer (International Union of Railways) classification Description Examples
B B 2 powered axles connected by driving rods, no bogies 319290, D2960, D2961, Other early diesel shunters
C C 3 powered axles connected by driving rods, no bogies BRBritish Rail or British Railways Class 08, BRBritish Rail or British Railways Class 09, BR Class 14
A1A-A1A (A1A)(A1A) Two bogies or wheel assemblies under the unit. Each bogie has one powered axle, one idle axle, and another powered axle. The powered axles are individually driven by traction motors. BR Class 31
B-B B'B' Two bogies or wheel assemblies under the unit. Each bogie has two powered axles, connected by driving rods or gears. BR Class 35, BR Class 42
Bo-Bo Bo'Bo' Four axles in two individual bogies, all driven by their own traction motors. BR Class 17, BR Class 20, BR Class 25, BR Class 27, BR Class 33, BR Class 73
C-C C'C' Two bogies or wheel assemblies under the unit, each with three powered axles, mechanically connected by driving rods or gears. BRBritish Rail or British Railways Class 52
Co-Co Co'Co' Two six-wheeled bogies with all axles powered, with a separate motor per axle. BR Class 37, BRBritish Rail or British Railways Class 50
1Co-Co1 (1Co)(Co1) Two eight-wheeled bogies, with three axles (six wheels) powered by separate motors for each axle, and an additional unpowered axle at the outer end of each bogie to reduce the axle load (the weight resting on each axle). BR Class 40

Steam locomotives and small diesel locomotives

As noted above, the wheel arrangement on steam locomotives and small diesel locomotives is generally described using Whyte notation, although it can of course also be described in the UICUnion Internationale des Chemins de fer (International Union of Railways) classification system. Oliver BulleidOliver Vaughan Snell Bulleid, Chief Mechanical Engineer (CME) of the Southern Railway 1937-1948, the Chief Mechanical Engineer of the Southern Railway, used a modified version of the UICUnion Internationale des Chemins de fer (International Union of Railways) method to number certain of his steam locomotives. A West Country/Battle of Britain class locomotive would be numbered in a pattern 21C XXX. The first two numbers referred to the number of 'unpowered' axles used for leading and trailing wheels, the third letter referred to the number of 'powered' axles used for driving wheels using the normal UICUnion Internationale des Chemins de fer (International Union of Railways) classification substitution A=1, B=2, C=3 etc. XXX was the unique identification of the particular locomotive, hence Taw Valley entered service as 21C127.

See also

Diesel Locomotives

References

Links