GWR 2857 Heavy Goods Loco

Revision as of 22:39, 27 June 2020 by Graham Phillips 110 (talk | contribs) (add photos)
GWR 2857 Heavy Goods Loco
2857 20110923.jpg
2857 approaching Highley
Built By GWR Swindon Works
Configuration 2-8-0
Power class GWR: E, BR: 8F
Axle load class GWR: Blue
Status In Service
Loco Number 2857
History
Built 1918
Designed By George Jackson Churchward
Type GWR 2800
1974 Purchased by 2857 Society
1975 Arrived on SVR
1979 First steamed in preservation
1985 Entered regular service on SVR
1994 Withdrawn for overhaul
2011 Reentered service
Technical
Length 63ft 2¼"
Weight 75t 10cwt
Tractive effort 35,380 lb
Pressure 225 lb/sq in

Steam Locomotives

2857 is a GWR Churchward 2800 Class locomotive, designed for heavy freight work. The GWR Power and Weight Classification were class E and axle load Blue respectively. During World War II some classes of locomotives were permitted to haul loads heavier than those specified in the working books for their power classification, distinguished by the white letter "X" painted above 2857's number plate.[1] Post-war the class was rated 8F by BR.

Contents

2857 in service

2857 was built in 1918 at the GWR’s Swindon Works and delivered new to Salisbury GWR depot in May of that year.[2] During a working life of 45 years it was based in many depots around the GWR (and later British Railways Western Region), including a brief spell at nearby Stourbridge shed in the early 1950s. The locomotive was withdrawn from Neath depot in April 1963 having recorded a total of 1,276,713 miles in service.[3]

2857 is paired with GWR 3500 gallon tender no 2355.

2857 in preservation

2857 was purchased from Woodham Bros scrapyard on 20th May 1974 by The 2857 Society for a cost of £5,250 plus £525 VAT; fund raising for the purchase was helped by a raffle organised by the SVRA Kidderminster branch which raised £1,950 nett.[4] The locomotive was moved by rail from Barry to the Severn Valley Railway in convoy with GWR Mogul 7325, arriving on 13th August 1975[5][6] (the 2857 Preservation Society web site states 20 August).[7] They were respectively the 69th and 70th locomotives to leave Barry.[8]

Restoration and first steaming

Restoration began at Bewdley in January 1976 and was carried out in the open air. A major setback was the discovery of a cracked cylinder casting. Although attempts at welding this failed, the locomotive was first steamed in preservation on 9th September 1979, minus cladding. A replacement cylinder block was acquired, having been found during the demolition of the Briton Ferry Steelworks in South Wales. The locomotive was steamed intermittently through 1980 but without entering regularly in service. Mileage recorded during the period was as follows:

Year Mileage
1979 20
1980 195
Total 215

Continued restoration and first full boiler ticket

2857 passes Clun castle near Newport

At the end of 1980 the SVR announced that preserved boilers on the railway needed to be brought up to 1980’s BR standards. The owning group therefore resumed the restoration, with the boiler being overhauled by the SVR as a contract job and the opportunity being taken to fit the replacement cylinder block among many other tasks. In spring 1984 a raffle organised by the SVRA Wolverhampton Branch was held to raise funds to help complete the restoration.[9]

2857 was steamed again on 18th August 1985 and after a week of running in was able to make her only appearance on the main line hauling a demonstration freight train as part of the GW 150 celebrations of that year (as a heavy freight locomotive, 2857 was not considered suitable for main line passenger rail tours):

Date Tour name Route Notes Web SVR News
10 Sep 1985 GW 150 Freight Demo Kidderminster-Hereford-Newport + return 25 SVR wagons also used 78-17
For further information on sources and references, see The Severn Valley Railway on the main line

2857 worked for the next 10 years until withdrawn for overhaul in December 1994, 1992 being spent on loan to the Gloucestershire Warwickshire Steam Railway.[10] Mileage recorded during the period was as follows:

Year Mileage
1985 449
1986 2,563
1987 2,913
1988 5,892
1989 5,519
1990 4,788
1991 4,683
1992 3,428
1993 5,308
1994 5,648
Total 41,191
Cumulative 41,406

Overhaul and second boiler ticket

After expiry of the boiler ticket in February 1995, the owing group began a heavy general overhaul.[11] Filming took place in October 2000 for an episode of the 2001 TV series “ Off the Rails” featuring Vince Henderson. The overhaul of 2857 was one of the items featured, although the commentary referred to the locomotive as a pannier tank!

2857 re-entered service after overhaul in July 2011, although initially the return to service was anything but trouble free. In December of that year water was discovered in both pistons, resulting in a period out of service for repairs. By April 2012 the decision had been taken to take 2857 out of service for a second time, this time for a boiler lift to cure some leaking stays. A third period out of service was needed in August 2012 following a major valve failure. Finally in December 2012 a crack was found in one of the main steam pipes between the regulator and the superheater header. Sourcing a replacement steam pipe was not easy, but 2857 finally resumed service in early March 2013.[12]

Following these troubles, 2857 became a reliable performer, recording the highest annual mileage of any steam locomotive on the SVR in each of the years 2013 to 2015. Mileage since 2010 is recorded on the 2010-2019 Timeline page. However it became apparent in 2016 that as the locomotive approached its 100th anniversary, significant work would soon be required including relining the cylinders, replacing valves and pistons and attending to a bent piston rod. The locomotive was therefore withdrawn for an intermediate overhaul in September 2017, with a complete boiler re-tube being carried out at the same time.[13] The locomotive returned to service on 16 May 2018[14], 100 years to the month since first entering service. On 18 September 2018 the locomotive passed 100,000 miles in preservation, carrying both a headboard "Still gong strong, 100,000 miles" and a "100" headcode.[15] The 100 headcode remained in use during the Autumn Steam Gala which began on 24 September.[16] It reappeared on 11 November for the centenary of Remembrance Day.

Gallery

See Also

References

  1. Wikipedia
  2. BR Database
  3. 2857 Society web site 1
  4. SVR News 33,34
  5. SVR News 37 p.2. and p.14.
  6. SVR Stock Book Ninth Edition
  7. 2857 Society web site 2
  8. The Barry Story, Beckett & Hardingham (2010)
  9. SVR News 71, 74
  10. 2857 Society web site 3
  11. 2857 Society web site 4
  12. 2857 Society web site 5
  13. SVR News 201
  14. SVR Social Media
  15. SVR social media
  16. SVRLive

Links

SVR Wiki

Main Page

From SVR Wiki
Jump to: navigation, search

Welcome to the Severn Valley Railway Wiki

From this week's featured article
Trimpley Reservoir can be seen to the west of the line between Bewdley and Arley. The reservoir, which is managed by Severn Trent Water, was opened in 1968 and covers 29 acres. It is open to the public and is used by the Trimpley Sailing Club, while other activities include angling, wildlife watching and walking. (Full article...)
Schematic Map of the SVRSevern Valley Railway
BridgnorthEardingtonHampton LoadeCountry Park HaltHighleyThe Engine HouseArleyVictoria BridgeNorthwood HaltWyre Forest LineBewdleyStourport BranchBewdley TunnelConnection to Network RailKidderminsterMaps#Schematic maps of the pre-closure SVRMapandlinks.png
Click on the map for a
larger interactive version

For 101 years between 1862 and 1963, the Severn Valley Railway formed part of the national railway network, running for 40 miles between Hartlebury and Shrewsbury. Established as a separate company, it was mainly operated by the Great Western Railway (GWRGreat Western Railway) and later by British Railways (BRBritish Rail or British Railways).

The present day Severn Valley Railway (SVRSevern Valley Railway) was established in 1965 to preserve part of the line as a heritage railway. Today it has six stations and two halts and runs for 16 miles along the Severn Valley between Bridgnorth in Shropshire and Kidderminster in Worcestershire, following the course of the River Severn for much of its route. Operations involve a mixture of steam and heritage diesel-hauled services.

This unofficial website is a project aimed to collect information and record events relating to the SVRSevern Valley Railway, both past and present.

For timetables, fare information, and news about special events, please visit the SVR Official Website. Other news and information of interest to members, shareholders and enthusiasts can be found on SVRLive.

In April 2023 the SVRSevern Valley Railway announced the launch of a Survival Fund to enable it to overcome the current financial crisis and implement longer-term plans for its future. Information and details of how to donate may be found on the SVRSevern Valley Railway's Survival Fund page.

Categories of article

History of the Severn Valley Railway

Current events on the SVRSevern Valley Railway

Information about the SVRSevern Valley Railway

Miscellaneous


Query Corner

Unsurprisingly, there are a large number of questions about the SVRSevern Valley Railway, both in pre-preservation days and for a number of historical items since then. Take a visit down to Query Corner to see if you have a recollection relating to some long forgotten event, or know of a reliable source (maybe an early edition of the SVR News?) that might have the information we need!

Adding to this Wiki

This site, or "wiki", is a collaborative effort, and anyone who has any knowledge relating to the SVRSevern Valley Railway should feel free to contribute. Once you have created a user account and logged in, you can modify any page by clicking the "Edit" button in the top right hand corner. For some tips on how to format pages, and some guidelines on how to make this wiki accessible can be found on Tips for contributing to the SVR Wiki.

Alternatively, if you don't feel confident editing this Wiki (although there is no reason you shouldn't!!), each article also has a "Discussion" page, which can be accessed by clicking the relevant button in the top left hand corner. This allows you to make additions, suggestions, or corrections to a page without making any change to the article itself.


Navigation menu