Eymore Cutting

Eymore Cutting looking east from near Victoria Bridge

Eymore Cutting is situated between Bewdley and Arley at the south (Bewdley) end of Victoria Bridge. It is a designated Site of Special Scientific Interest (SSSI).

Contents

Eymoor Wood

The extract from the OS 6in map above, published in 1905, shows Eymore Cutting and the immediate surrounding area. The railway runs along the southern edge of the ancient wooded area of Eymore Wood. The cutting begins to the east of Eymore Farm and deepens as it curves and descends towards Victoria Bridge at a Gradient profile of 1 in 145. The signal post ("S.P.") immediately before Victoria Bridge is the distant signal on the approach to Arley station.

Trimpley Private Road Bridge was constructed when the railway was built in order to provide access to the Wood from Eymore Farm which was situated to the south of the cutting. A stream which runs through the Wood is carried underneath the cutting through a Victorian syphon culvert. This is included as item SVR040* in the Wyre Forest District Council Local Heritage List, which notes it as being an "extremely unusual feature".[note 1] The positions of the road bridge and the stream can both be seen on the map extract.

The Trimpley Reservoirs & Waterworks were constructed in 1964 and commissioned in 1967.[1] The land south of the Farm buildings is now the main reservoir, with the Waterworks situated on the area of land between the wood and the railway. Water from the reservoir is pumped to the waterworks via Trimpley Pipe Bridge which now also spans the cutting a short distance east of the road bridge.

The pictures of the cutting below are all looking west (towards Arley) and progressively travelling in that direction:

Geology

On 19 March 1991 Eymore Cutting was designated as a Site of Special Scientific Interest (SSSI) by English Nature (now known as Natural England) due to its unusual geology. The designation summary is as follows:[2]

SITE NAME: EYMORE RAILWAY CUTTING
DISTRICT: WYRE FOREST
SITE REF: 15 WK3
Status: Site at Special Scientific Interest (SSSI) notified under Section 28 of the Wildlife and Countryside Act 1981 as amended
Local Planning Authority: HEREFORD & WORCESTER COUNTY COUNCIL, Wyre Forest District Council
National Grid Reference: SO 767792
Area: 0.26 (ha.) 0.64 (ac.)

The cutting is notable as the only available exposure of fossiliferous Eymore Farm marine band, a Bolsovian Substage rock.[3][4]. It is a rare occurrence of coal-bearing mudstones appearing at surface level, first described in 1946.[5]

Unfortunately the cutting's geology has proved less than stable over the years.

  • In summer 1985 (before the area was designated as an SSSI), work was deemed necessary to remove some unstable rock. Part of the cutting was strengthened using redundant concrete pads from the former BR yard at Kidderminster.[7]
  • Wet weather in the winter of 2000-2001 resulted in a rock fall on the west side of the cutting. Although the rocks which blocked the line were quickly removed, the cutting side remained unstable and English Nature required the SVR to engineer a solution to the problem which would not damage the site. While this was developed in Spring 2001 a watchman was permanently on duty on running days to warn approaching trains if necessary.[8] English Nature rejected the use of a retaining wall or additional 'gabions' to those already in place, and opted for the cutting wall to be re-profiled at a shallower angle[9].
  • Another rock fall occurred in February 2005. This required further re-profiling of the cutting wall[10].
  • The ground between Victoria Bridge and the entrance to Eymore Cutting was one of the areas affected the freak storms in June and July 2007. The earlier rockfalls occurred in the cutting, just beyond the signal in the picture below.

In 2009 the condition of the SSSI was surveyed and assessed by Natural England as 'Unfavourable'. The assessment noted that "The features are only visible from the trackbed of the railway line. Vegetation growth has occurred and obscures some features. Rock-netting has been applied to southern cutting wall and obscures views of the features and denies physical contact with, and collecting from, the features on that wall. Small landslips on the northern cutting side are more of a hazard to the line than damaging to the SSSI, unless they result in the installation of further rock-netting."[11]

See also

Notes

  1. The Local Heritage List identifies the location as "Eyemore Cutting". This alternate spelling also occasionally appears elsewhere.

References

  1. Marshall (1989) p. 95.
  2. Natural England designation
  3. Wyre Forest District Local Development Framework Core Strategy Development Plan Document Sustainability Appraisal Scoping Report July 2007 (Retrieved 11 November 2019)
  4. The BGS Lexicon of Named Rock Units (Retrieved 11 November 2019)
  5. C.J. Cleal and B.A. Thomas, British Upper Carboniferous Stratigraphy, Springer Science & Business Media (2013), pp. 139-141 via Google books
  6. Berrow's Worcester Journal, reported in Marshall (1989) p. 47.
  7. SVR News 79
  8. SVR News 135
  9. SVR News 136
  10. SVR News 150
  11. Natural England

Links

SVR Wiki

Main Page

From SVR Wiki
Jump to: navigation, search

Welcome to the Severn Valley Railway Wiki

From this week's featured article
Trimpley Reservoir can be seen to the west of the line between Bewdley and Arley. The reservoir, which is managed by Severn Trent Water, was opened in 1968 and covers 29 acres. It is open to the public and is used by the Trimpley Sailing Club, while other activities include angling, wildlife watching and walking. (Full article...)
Schematic Map of the SVRSevern Valley Railway
BridgnorthEardingtonHampton LoadeCountry Park HaltHighleyThe Engine HouseArleyVictoria BridgeNorthwood HaltWyre Forest LineBewdleyStourport BranchBewdley TunnelConnection to Network RailKidderminsterMaps#Schematic maps of the pre-closure SVRMapandlinks.png
Click on the map for a
larger interactive version

For 101 years between 1862 and 1963, the Severn Valley Railway formed part of the national railway network, running for 40 miles between Hartlebury and Shrewsbury. Established as a separate company, it was mainly operated by the Great Western Railway (GWRGreat Western Railway) and later by British Railways (BRBritish Rail or British Railways).

The present day Severn Valley Railway (SVRSevern Valley Railway) was established in 1965 to preserve part of the line as a heritage railway. Today it has six stations and two halts and runs for 16 miles along the Severn Valley between Bridgnorth in Shropshire and Kidderminster in Worcestershire, following the course of the River Severn for much of its route. Operations involve a mixture of steam and heritage diesel-hauled services.

This unofficial website is a project aimed to collect information and record events relating to the SVRSevern Valley Railway, both past and present.

For timetables, fare information, and news about special events, please visit the SVR Official Website. Other news and information of interest to members, shareholders and enthusiasts can be found on SVRLive.

In April 2023 the SVRSevern Valley Railway announced the launch of a Survival Fund to enable it to overcome the current financial crisis and implement longer-term plans for its future. Information and details of how to donate may be found on the SVRSevern Valley Railway's Survival Fund page.

Categories of article

History of the Severn Valley Railway

Current events on the SVRSevern Valley Railway

Information about the SVRSevern Valley Railway

Miscellaneous


Query Corner

Unsurprisingly, there are a large number of questions about the SVRSevern Valley Railway, both in pre-preservation days and for a number of historical items since then. Take a visit down to Query Corner to see if you have a recollection relating to some long forgotten event, or know of a reliable source (maybe an early edition of the SVR News?) that might have the information we need!

Adding to this Wiki

This site, or "wiki", is a collaborative effort, and anyone who has any knowledge relating to the SVRSevern Valley Railway should feel free to contribute. Once you have created a user account and logged in, you can modify any page by clicking the "Edit" button in the top right hand corner. For some tips on how to format pages, and some guidelines on how to make this wiki accessible can be found on Tips for contributing to the SVR Wiki.

Alternatively, if you don't feel confident editing this Wiki (although there is no reason you shouldn't!!), each article also has a "Discussion" page, which can be accessed by clicking the relevant button in the top left hand corner. This allows you to make additions, suggestions, or corrections to a page without making any change to the article itself.


Navigation menu