Difference between revisions of "BR Class 52 D1013 Western Ranger"

From SVR Wiki
Jump to: navigation, search
(typo)
(featured article)
Line 19: Line 19:
 
|weight    = 108t
 
|weight    = 108t
 
}}
 
}}
 +
'''D1013 Western Ranger''' is a BR Class 52 Type 4 diesel-hydraulic locomotive. A total of 74 were built for BR's Western Region between 1961 and 1964. All were given two-word names beginning "Western", hence the type became known as Westerns. Other nicknames included D1000s or 'thousands', and 'wizzers'.
  
 +
==BR Class 52 locomotives==
 +
During the 1950s the British Transport Commission (BTC) developed plans to phase out steam and introduce diesel and electric locomotives. Of the two main types of diesel traction, the BTC favoured diesel-electric ("DE") where a diesel engine is used to power a generator which in turn power electric traction motors, normally axle-mounted, their preference being mainly due to the lower revving diesel engines supposedly requiring less maintenance. However the individual BT regions enjoyed a high degree of autonomy in setting the design criteria for their locomotives and the Western Division continued the GWR tradition of being different by opting instead for diesel-hydraulic transmission ("DH"), commonly used at the time in Germany. This uses a torque converter (a similar principle to that found in an automatic car) to power the axles via cardan shafts and axledrives. Although this requires higher revving engine(s) to create the necessary torque, the system had several advantages:
 +
*It resulted in a lighter locomotive than the equivalent diesel-electric transmission, providing a better power to weight ratio and reducing track wear.
 +
*It gave a higher starting tractive effort, making it easier to move a heavy load from standstill.
 +
*It had the capability to apply and maintain full power at low speed, useful on an incline (electric motors used extensively in that manner being prone to overheating)
 +
*It had less potential for wheel slip due to the axles being coupled by the cardan shafts (with individually powered DE axles a single axle can slip, causing a temporary reduction in power as the locomotive 'finds its feet').
  
British Railways (BR) assigned Class 52 to the Type 4 diesel-hydraulic locomotives built between 1961 and 1964 for BR(W). All were given two-word names beginning "Western", hence the type became known as Westerns.
+
The Western Region initially introduced the Type 3 B-B [[BR Class 35 D7029|Hymeks]] and Type 4 B-B [[BR Class 42 D821 Greyhound|Warships]] into service, but these had proved underpowered for top-link services. In early 1959 the Swindon drawing office under BR(W) CM&EE Sam Smeddle began work on a new mixed traffic C-C design which would become the Western, essentially an enlarged 'Warship' with two more axles and more powerful charge air-cooled diesel engines. While design work was still in progress, the BTC ordered 74 of the Type of which 35 were to be built at Swindon and 39 at Crewe. In the event only D1000-29 were built at Swindon with the first of the class, D1000, entering service in December 1961.
 +
 
 +
From introduction the Westerns were used mainly on express passenger work, but also on heavy freight duties. They initially suffered from reliability issues, mainly with the transmission output shaft bearings and final drives. By the late 1960s these had been resolved and the locomotives performed well on the accelerated services introduced to compete with the M4 motorway. However the working life of the class would be relatively short. By 1968 the transfer of freight to roads and the removal of rural networks and branch lines meant BR had too many locomotives. The hydraulics were unpopular with BR engineering, mainly due to the additional maintenance costs, and the 1968 traction plan foresaw their end.
 +
 
 +
The arrival of class 50s and the air-conditioned Mark 2 stock which required ETH saw the Westerns increasingly used on freight duties. Swindon stopped overhauling Westerns in autumn 1972 and withdrawals began in 1973, with the last members of the Class including D1013 being withdrawn in early 1977.  
  
 
==D1013 in service==
 
==D1013 in service==
D1013 Western Ranger was outshopped from BR Swindon Works in December 1962.  Following service at Cardiff Canton, Old Oak Common, Swansea Landore and Plymouth Laira, Western Ranger was withdrawn from service in 1977 after around 1.3 million miles in service.  
+
D1013 Western Ranger was outshopped from BR Swindon Works in December 1962.  Its allocations were:
 +
*Dec 1962- 88A Cardiff Canton
 +
*Mar 1963- 81A Old Oak Common
 +
*Apr 1963- 88A Cardiff Canton
 +
*Feb 1965- 87E Landore
 +
*Apr 1966- 84A Laira
 +
*Apr 1968- 87E Landore
 +
*Oct 1971- 84A Laira
 +
 +
While in service it carried the following liveries:
 +
 
 +
*1962-1967: Maroon with half-yellow warning panels, black backed number and nameplates and black roof panels.
 +
*1967-1976: Blue with full yellow warning panels, black backed number and nameplates.
 +
*1976-1977: Blue with full yellow ends, red backed number and nameplates.
 +
 
 +
On 26 September 1965, D1013 was involved in an accident at Llanharran, South Wales, while hauling the 16.15 Swansea to Paddington express service The locomotive hit the tail end of a crane while travelling at around 35mph, sustaining damage to the front end.
 +
 
 +
On 26 February 1977, D1013 and D1023 Western Fusilier worked the last Western rail tour on BR, the "Western Tribute" Paddington – Swindon – Newport – Swansea – Newport – Bristol – Plymouth – Newbury - Paddington. Two days later the remaining members of the Class including Western Ranger were withdrawn from service, with D1013 having achieved around 1.3 million miles in service.  
  
 
==D1013 in preservation==
 
==D1013 in preservation==
On 14 May 1977 D1013 was purchased from BR by Holdsworth Conversions Ltd., a company owned by Mr Richard Holdsworth, a member of the [[Western Locomotive Association]]. He put the locomotive under the care of the WLA. Following purchase the locomotive was repainted in original maroon livery.  In company with [[BR Class 52 D1062 Western Courier|D1062 Western Courier]], D1013 moved to the Paignton & Dartmouth Railway, and following tyre turning at Cardiff Canton both arrived on the SVR on 29 September 1978.
+
On 14 May 1977 D1013 was purchased from BR by Holdsworth Conversions Ltd., a company owned by Mr Richard Holdsworth, a member of the [[Western Locomotive Association]]. He put the locomotive under the care of the WLA. On 14 June 1977 D1013 was hauled to the Paignton & Dartmouth Railway by Class 47 47013 where it joined [[BR Class 52 D1062 Western Courier|D1062 Western Courier]]. On 9 October 1977 D1013 made its first official run in preservation during a "Western Day" on the Torbay Steam Railway with D1062.
 +
 
 +
The final working on the Torbay Steam Railway was on 29 April 1978. Both locomotives left the railway on 6 August 1978 and were hauled to Cardiff Canton depot for tyre turning. On 29 September 1978 they were hauled from Cardiff Canton to Foley Park on the SVR, becoming the SVR's first main line diesels. SVR News noted that their arrival would "obviously be the cause of much debate"; the original draft locomotive agreement envisaged that they would be based at Bridgnorth and operated on special "Western" weekends and certain other occasions, but not normally used instead of steam on scheduled SVR trains.<ref>SVR News 48</ref>
 +
 
 +
On 31 March and 1 April 1979 D1013 and D1062 took part in the SVR's first "Western Weekend", the 1 April seeing the first double headed 'Western' hauled train in preservation.
  
 
In 1982, Western Ranger was used in the filming of the BBC TV sit-com [[L For Lester]].
 
In 1982, Western Ranger was used in the filming of the BBC TV sit-com [[L For Lester]].
Line 33: Line 65:
 
On 11 May 1984, D1013 was the first SVR locomotive to work onto the newly acquired [[Kidderminster]] site, hauling a load of sleepers for installation at the station which was still under construction at the time.<ref>SVR News 77</ref>  
 
On 11 May 1984, D1013 was the first SVR locomotive to work onto the newly acquired [[Kidderminster]] site, hauling a load of sleepers for installation at the station which was still under construction at the time.<ref>SVR News 77</ref>  
  
In 1985 Holdsworth Conversions Ltd. became insolvent and the receiver advertised the locomotive for sale. The WLA informed the receiver that major parts were owned by the Association, removal of which would render the locomotive out of gauge for removal. Sale was agreed and on 16 October 1995 ownership passed to Roger Smith, remaining under care of the WLA. On 22 March 2000 ownership passed to Western Ranger Limited, before being passed to the WLA.
+
On 9 March 1985 4930 Hagley Hall failed, with D1013 working the 16:20 from Bridgnorth to Kidderminster.<ref>SVR News 76</ref> The same year 1985 Holdsworth Conversions Ltd. became insolvent and the receiver advertised the locomotive for sale. The WLA informed the receiver that major parts were owned by the Association, removal of which would render the locomotive out of gauge for removal. Sale was agreed and on 16 October 1995 ownership passed to Roger Smith, remaining under care of the WLA. On 22 March 2000 ownership passed to Western Ranger Limited, before being passed to the WLA.
 +
 
 +
In April 2001 D1013 was repainted at Kidderminster, the new livery being blue with full yellow warning panels, black backed number and nameplates. On 23 March 2002 it received an overhauled "A" end engine.
  
 
In 2008 the WLA received a Preservation of Industrial and Scientific Material (PRISM) Fund award of £2,500, which covered the first stage of restoration.<ref>[https://www.artscouncil.org.uk/sites/default/files/download-file/PRISM_Annual_report_2008_2009.pdf] PRISM Fund Annual Report
 
In 2008 the WLA received a Preservation of Industrial and Scientific Material (PRISM) Fund award of £2,500, which covered the first stage of restoration.<ref>[https://www.artscouncil.org.uk/sites/default/files/download-file/PRISM_Annual_report_2008_2009.pdf] PRISM Fund Annual Report
2008-2009</ref> On 10 October 2009 she was withdrawn for overhaul at [[Bridgnorth]], with rewiring a particular priority. Work is progressing, with D1013 moving to the [[Diesel Depot]] on 25 November 2018 to facilitate the rest of her overhaul.<ref>WLA Facebook 24 November 2018</ref>
+
2008-2009</ref> The main picture above shows D1013 in September 2009. On 10 October 2009 the locomtive was withdrawn for overhaul at [[Bridgnorth]], with rewiring a particular priority. Work is progressing, with D1013 moving to the [[Diesel Depot]] on 25 November 2018 to facilitate the rest of the overhaul.<ref>WLA Facebook 24 November 2018</ref>
  
The class's method of construction precludes locomotives being winched onto and off road trailers, and so moves off the SVR are exclusively being hauled by rail. The locomotive's [[TOPS codes#TOPS_locomotive_classification_and_numbering|TOPS code]] is 89413.
+
The Class's method of construction precludes locomotives being winched on and off road trailers, and so moves off the SVR are exclusively being hauled by rail. The locomotive's [[TOPS codes#TOPS_locomotive_classification_and_numbering|TOPS code]] is 89413.
  
 
==See also==
 
==See also==
[[Diesel Locomotives]]<br>
+
*[[Diesel Locomotives]]
[[SVR-based diesel locomotives visiting other events]]<br>
+
*[[SVR-based diesel locomotives visiting other events]]
[[Rolling stock currently under restoration]]
+
*[[Rolling stock currently under restoration]]
  
 
==References==
 
==References==
SVR Stock Book Ninth Edition
 
 
<references />
 
<references />
 +
*"Hydraulic Legends", Railways Illustrated "Bookazine"
 +
*[https://www.westernlocomotives.co.uk/d1013 WLA D1013 page]
  
 
==Links==
 
==Links==
Line 53: Line 88:
 
[http://en.wikipedia.org/wiki/British_Rail_Class_52 British Rail Class 52 on Wikipedia]
 
[http://en.wikipedia.org/wiki/British_Rail_Class_52 British Rail Class 52 on Wikipedia]
  
{{DieselNavbox}}
+
{{DieselNavbox}}  
 +
[[Category:Featured articles]]

Revision as of 15:29, 18 October 2021

BRBritish Rail or British Railways Class 52 D1013 Western Ranger
D1013 20090912.jpg
D1013 Western Ranger at Bewdley in 2009
Built By BRBritish Rail or British Railways Swindon Works
Configuration C-C
Power type Diesel Hydraulic
Status Under overhaul
Loco Number D1013
History
Built 1962
Designed By British Railways
Type Class 52
1977 Purchased by private owner
1978 Moved to SVRSevern Valley Railway
2009 Overhaul began
Technical
Length 68ft
Weight 108t

Diesel Locomotives

D1013 Western Ranger is a BRBritish Rail or British Railways Class 52 Type 4The British Railways classification for diesel locomotives of 2000 bhp to 2999 bhp diesel-hydraulic locomotive. A total of 74 were built for BRBritish Rail or British Railways's Western Region between 1961 and 1964. All were given two-word names beginning "Western", hence the type became known as Westerns. Other nicknames included D1000s or 'thousands', and 'wizzers'.

BRBritish Rail or British Railways Class 52 locomotives

During the 1950s the British Transport Commission (BTC) developed plans to phase out steam and introduce diesel and electric locomotives. Of the two main types of diesel traction, the BTC favoured diesel-electric ("DE") where a diesel engine is used to power a generator which in turn power electric traction motors, normally axle-mounted, their preference being mainly due to the lower revving diesel engines supposedly requiring less maintenance. However the individual BT regions enjoyed a high degree of autonomy in setting the design criteria for their locomotives and the Western Division continued the GWRGreat Western Railway tradition of being different by opting instead for diesel-hydraulic transmission ("DH"), commonly used at the time in Germany. This uses a torque converter (a similar principle to that found in an automatic car) to power the axles via cardan shafts and axledrives. Although this requires higher revving engine(s) to create the necessary torque, the system had several advantages:

  • It resulted in a lighter locomotive than the equivalent diesel-electric transmission, providing a better power to weight ratio and reducing track wear.
  • It gave a higher starting tractive effort, making it easier to move a heavy load from standstill.
  • It had the capability to apply and maintain full power at low speed, useful on an incline (electric motors used extensively in that manner being prone to overheating)
  • It had less potential for wheel slip due to the axles being coupled by the cardan shafts (with individually powered DE axles a single axle can slip, causing a temporary reduction in power as the locomotive 'finds its feet').

The Western Region initially introduced the Type 3The British Railways classification for diesel locomotives of 1500 bhp to 1999 bhp B-B Hymeks and Type 4The British Railways classification for diesel locomotives of 2000 bhp to 2999 bhp B-B Warships into service, but these had proved underpowered for top-link services. In early 1959 the Swindon drawing office under BRBritish Rail or British Railways(W) CM&EEEnglish Electric Sam Smeddle began work on a new mixed traffic C-C design which would become the Western, essentially an enlarged 'Warship' with two more axles and more powerful charge air-cooled diesel engines. While design work was still in progress, the BTC ordered 74 of the Type of which 35 were to be built at Swindon and 39 at Crewe. In the event only D1000-29 were built at Swindon with the first of the class, D1000, entering service in December 1961.

From introduction the Westerns were used mainly on express passenger work, but also on heavy freight duties. They initially suffered from reliability issues, mainly with the transmission output shaft bearings and final drives. By the late 1960s these had been resolved and the locomotives performed well on the accelerated services introduced to compete with the M4 motorway. However the working life of the class would be relatively short. By 1968 the transfer of freight to roads and the removal of rural networks and branch lines meant BRBritish Rail or British Railways had too many locomotives. The hydraulics were unpopular with BRBritish Rail or British Railways engineering, mainly due to the additional maintenance costs, and the 1968 traction plan foresaw their end.

The arrival of class 50s and the air-conditioned Mark 2 stock which required ETHElectric Train Heating saw the Westerns increasingly used on freight duties. Swindon stopped overhauling Westerns in autumn 1972 and withdrawals began in 1973, with the last members of the Class including D1013 being withdrawn in early 1977.

D1013 in service

D1013 Western Ranger was outshopped from BRBritish Rail or British Railways Swindon Works in December 1962. Its allocations were:

  • Dec 1962- 88A Cardiff Canton
  • Mar 1963- 81A Old Oak Common
  • Apr 1963- 88A Cardiff Canton
  • Feb 1965- 87E Landore
  • Apr 1966- 84A Laira
  • Apr 1968- 87E Landore
  • Oct 1971- 84A Laira

While in service it carried the following liveries:

  • 1962-1967: Maroon with half-yellow warning panels, black backed number and nameplates and black roof panels.
  • 1967-1976: Blue with full yellow warning panels, black backed number and nameplates.
  • 1976-1977: Blue with full yellow ends, red backed number and nameplates.

On 26 September 1965, D1013 was involved in an accident at Llanharran, South Wales, while hauling the 16.15 Swansea to Paddington express service The locomotive hit the tail end of a crane while travelling at around 35mph, sustaining damage to the front end.

On 26 February 1977, D1013 and D1023 Western Fusilier worked the last Western rail tour on BRBritish Rail or British Railways, the "Western Tribute" Paddington – Swindon – Newport – Swansea – Newport – Bristol – Plymouth – Newbury - Paddington. Two days later the remaining members of the Class including Western Ranger were withdrawn from service, with D1013 having achieved around 1.3 million miles in service.

D1013 in preservation

On 14 May 1977 D1013 was purchased from BRBritish Rail or British Railways by Holdsworth Conversions Ltd., a company owned by Mr Richard Holdsworth, a member of the Western Locomotive Association. He put the locomotive under the care of the WLAWestern Locomotive Association Ltd.. On 14 June 1977 D1013 was hauled to the Paignton & Dartmouth Railway by Class 47 47013 where it joined D1062 Western Courier. On 9 October 1977 D1013 made its first official run in preservation during a "Western Day" on the Torbay Steam Railway with D1062.

The final working on the Torbay Steam Railway was on 29 April 1978. Both locomotives left the railway on 6 August 1978 and were hauled to Cardiff Canton depot for tyre turning. On 29 September 1978 they were hauled from Cardiff Canton to Foley Park on the SVRSevern Valley Railway, becoming the SVRSevern Valley Railway's first main line diesels. SVRSevern Valley Railway News noted that their arrival would "obviously be the cause of much debate"; the original draft locomotive agreement envisaged that they would be based at Bridgnorth and operated on special "Western" weekends and certain other occasions, but not normally used instead of steam on scheduled SVRSevern Valley Railway trains.[1]

On 31 March and 1 April 1979 D1013 and D1062 took part in the SVRSevern Valley Railway's first "Western Weekend", the 1 April seeing the first double headed 'Western' hauled train in preservation.

In 1982, Western Ranger was used in the filming of the BBC TV sit-com L For Lester.

On 11 May 1984, D1013 was the first SVRSevern Valley Railway locomotive to work onto the newly acquired Kidderminster site, hauling a load of sleepers for installation at the station which was still under construction at the time.[2]

On 9 March 1985 4930 Hagley Hall failed, with D1013 working the 16:20 from Bridgnorth to Kidderminster.[3] The same year 1985 Holdsworth Conversions Ltd. became insolvent and the receiver advertised the locomotive for sale. The WLAWestern Locomotive Association Ltd. informed the receiver that major parts were owned by the Association, removal of which would render the locomotive out of gauge for removal. Sale was agreed and on 16 October 1995 ownership passed to Roger Smith, remaining under care of the WLAWestern Locomotive Association Ltd.. On 22 March 2000 ownership passed to Western Ranger Limited, before being passed to the WLAWestern Locomotive Association Ltd..

In April 2001 D1013 was repainted at Kidderminster, the new livery being blue with full yellow warning panels, black backed number and nameplates. On 23 March 2002 it received an overhauled "A" end engine.

In 2008 the WLAWestern Locomotive Association Ltd. received a Preservation of Industrial and Scientific Material (PRISMThe Preservation of Industrial and Scientific Material (PRISM) Fund, a source of funding from the Arts Council/The Museums, Libraries and Archives Council.) Fund award of £2,500, which covered the first stage of restoration.[4] The main picture above shows D1013 in September 2009. On 10 October 2009 the locomtive was withdrawn for overhaul at Bridgnorth, with rewiring a particular priority. Work is progressing, with D1013 moving to the Diesel Depot on 25 November 2018 to facilitate the rest of the overhaul.[5]

The Class's method of construction precludes locomotives being winched on and off road trailers, and so moves off the SVRSevern Valley Railway are exclusively being hauled by rail. The locomotive's TOPS code is 89413.

See also

References

  1. SVRSevern Valley Railway News 48
  2. SVRSevern Valley Railway News 77
  3. SVRSevern Valley Railway News 76
  4. [1] PRISMThe Preservation of Industrial and Scientific Material (PRISM) Fund, a source of funding from the Arts Council/The Museums, Libraries and Archives Council. Fund Annual Report 2008-2009
  5. WLAWestern Locomotive Association Ltd. Facebook 24 November 2018

Links

Western Locomotive Association website
British Rail Class 52 on Wikipedia