Difference between revisions of "BR 'Dogfish' Ballast Hopper Wagons"

From SVR Wiki
Jump to: navigation, search
m (edit link)
(featured article)
 
(One intermediate revision by one other user not shown)
Line 13: Line 13:
 
|telcode    = DOGFISH
 
|telcode    = DOGFISH
 
|topscode  = ZFV
 
|topscode  = ZFV
|brakes    = Vacuum fitted
+
|brakes    = Vacuum fitted, air through pipe (2022)
 
|built      = 1957
 
|built      = 1957
 
|years1    = 1996
 
|years1    = 1996
Line 27: Line 27:
 
|years6    =  
 
|years6    =  
 
|events6    =  
 
|events6    =  
}}From around 1955, BR adopted the 19 ton CATFISH and 24 ton DOGFISH as their standard vacuum-fitted small Steel Ballast Hopper wagons. The SVR has been home to three of the latter type. The DOGFISH was fitted with centre and side doors, allowing ballast to be dropped between the rails or to either side. A total of 1,249 of this type were built under Diagram 1/587, some by Metro-Cammell and others including the three SVR examples by Chas Roberts of Wakefield.<ref>LTSV Wagons</ref> BR Civil Engineers' wagons were commonly given ‘fish’ telegraph codes, with Dogfish being a general name describing various small sharks.<ref name=Larkin>[[Bibliography#Other References|Larkin Vol 1 (2011), p.36.]]</ref>.  
+
}}'''DB9836115''' is '''DOGFISH ballast hopper wagon'''. The SVR was formerly home to three wagons of this type, although two have now left the Railway.
 +
 
 +
==DOGFISH ballast wagons==
 +
In 1955 BR adopted the 19-ton CATFISH as its first standard vacuum-fitted small steel ballast hopper wagon design. This had a single bottom door which only allowed stone discharge between the rails.<ref>[[Bibliography#Other References|Larkin Vol 1 (2011), p.4.]]</ref> The 24-ton DOGFISH, which was introduced in the following year, was an enlarged version which was several inches taller and was fitted with both centre and side doors, allowing ballast to be dropped to either side of the rails as well as between them. The doors on the latter type were operated from three control wheels on a platform at one end of the wagon. The vacuum cylinder was mounted on the platform at the opposite end, next to which a hand wheel on the side of the wagon controlled the parking brake. The 4-wheel chassis had a 14 ft wheelbase and measured 22ft 6in over the headstocks.<ref name=Larkin>[[Bibliography#Other References|Larkin Vol 1 (2011), pp.36-37.]]</ref>
 +
 
 +
The DOGFISH was the most numerous four-wheeled ballast hopper built for BR, with a total of 1,249 completed under Diagram 1/587 in ten Lots between 1956 and 1959. Of those, Metro-Cammell built 559 in four Lots and Chas Roberts of Wakefield built 548 in three Lots (all three of the SR's examples were built by Chas Roberts). The final 142 wagons were built in three Lots by BR at Shildon. <ref>[[Bibliography#Other References|Rowland 1985), Appendix.4.]]</ref> All were vacuum fitted; there were certain design changes during construction although these did not warrant a new Diagram number. In particular, early examples had oil axle boxes while later examples came with OLEO buffers and roller bearings; those intended for BR's Southern region were also fitted with longer side chutes to clear the third rail.<ref name=Larkin/>.
 +
 
 +
In service they carried a variety of different liveries, beginning with all over Black, then 'Gulf Red'
 +
from 1960 to 1962. Olive green was used from around 1966 and grey from around 1983.
 +
 
 +
BR Civil Engineers' wagons were commonly given 'fish' telegraph codes, with Dogfish being a general name describing various small sharks.<ref name=Larkin/>.  When [[TOPS codes]] were introduced in the late 1960s they were allocated the code ZFV.
  
__TOC__
 
 
==Service and Preservation==
 
==Service and Preservation==
  
Line 35: Line 44:
  
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
!Number !! Built !! Built by!! Wagon Survey !! Notes
+
!Number !! Built !! Built by!! Lot !!Wagon Survey !! Notes
 
|-
 
|-
| 983115 || 1957 || Chas Roberts ||  [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9636 Link] ||  
+
| 983115 || 1957 || Chas Roberts ||  2939 || [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9636 Link] || Still resident
 
|-
 
|-
| 983194 || 1957 || Chas Roberts ||  [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9382 Link] || Left 2018
+
| 983194 || 1957 || Chas Roberts ||  2939 || [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9382 Link] || Left 2018
 
|-
 
|-
| 993126 || 1956 || Chas Roberts || [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9383 Link] || Left 2018
+
| 993126 || 1956 || Chas Roberts || 2821|| [http://www.ws.rhrp.org.uk/ws/WagonInfo.asp?Ref=9383 Link] || Left 2018
 
|-
 
|-
 
|}
 
|}
  
DB983115 was initially allocated to Llynclys Junction (Llandu Quarries).<ref name=Larkin/> Following the closure of the Burton Wagon Repair Department, DB 983115 arrived on the SVR by road on 2 December 1996 having been purchased by Bridgnorth C&W member John Briscoe.<ref>SVR News 122</ref> It was immediately put into use on Engineers' P-Way trains.<ref>SVR Stock Book Ninth Edition</ref> Two further DOGFISH were later acquired for the same purpose, and the first three photographs below show all three wagons in a ballast train at Bewdley in April 2015.
+
DB983115 was built in 1957 and initially allocated to Llynclys Junction (Llandu Quarries).<ref name=Larkin/>  
 +
 
 +
<gallery mode=packed heights=200px style="text-align:left">
 +
BR_983115_Plate_20180603.jpg|Works plate of DB983115
 +
</gallery>
 +
 
 +
Following the closure of the Burton Wagon Repair Department, DB 983115 arrived on the SVR by road on 2 December 1996 having been selected for preservation by then-P. Way Department Supervisor Gerry Carter and purchased by Bridgnorth C&W member John Briscoe.<ref>SVR News 122</ref> [[BR 989098 'Mermaid' Ballast Wagon|MERMAID DB989098]] was also acquired from Burton in the same manner and arrived the following day. Both were immediately put into use on Engineers' P-Way trains.<ref>SVR Stock Book Ninth Edition</ref>
  
In January 2018 it was reported that two of the three had been sold/transferred to the Swanage Railway. The remaining wagon, 983115, was photographed at Eardington in June 2018.
+
Two further DOGFISH were later acquired by the SVR for the same purpose.<ref group="note">The date of arrival and prior history of the other two DOGFISH is uncertain. They were not listed in the 1998 Stock Book, but were photographed in use on the SVR from around 2011 onwards.</ref> These were DB983194 (initially allocated to Batts Combe Quarry, Cheddar on the Western Region)<ref name=Larkin/> and DB993126. The three photographs below show all three wagons in a ballast train at Bewdley in April 2015.
  
==Gallery==
+
<gallery mode=packed heights=200px style="text-align:left">
<gallery>
+
BR_983115_20150426.jpg | 983115
File: BR_983115_20150426.jpg | 983115
+
BR_983194_20150426.jpg | 983194
File: BR_983194_20150426.jpg | 983194
+
BR_993126_20150426.jpg | 993126
File: BR_993126_20150426.jpg | 993126
 
BR_983115_Plate_20180603.jpg|Works plate of DB983115
 
 
</gallery>
 
</gallery>
 +
 +
In 2017 [[SVR(H)]] acquired six [[BR 'Seacow' 40t Bogie Ballast Hoppers| SEACOW 40T ballast hoppers]] (five operational plus one spare). These were both larger than the DOGFISH and air-braked, potentially rendering the DOGFISH surplus to requirements. In January 2018 it was reported that two of the three had been sold/transferred to the Swanage Railway. The remaining privately-owned wagon, 983115, was photographed at Eardington in June 2018. In December 2022 it was fitted with a through pipe for air braking at [[Carriage Repair Works#Kidderminster_Carriage_Repair_Works|Kidderminster Carriage Repair Works]].
  
 
==See also==
 
==See also==
[[Goods Wagons | List of goods wagons]] <br>
+
*[[Goods Wagons | List of goods wagons]]
[[Wagons formerly resident on the SVR]]
+
*[[Wagons formerly resident on the SVR]]
 +
 
 +
==Notes==
 +
<references group="note"/>
  
 
==References==
 
==References==
Line 65: Line 83:
  
 
==Links==
 
==Links==
[http://www.ltsv.com/w_profile_040.php LTSV Wagons: ZEV 'Catfish'/ZFV 'Dogfish' Ballast Hoppers]
+
*[http://www.ltsv.com/w_profile_040.php LTSV Wagons: ZEV 'Catfish'/ZFV 'Dogfish' Ballast Hoppers]
 +
*[http://srstock.co.uk/ Swanage Railway Rolling Stock - Public View] (includes further information on the two Dogfish)
 +
 
 +
[[Category:Featured articles]]

Latest revision as of 12:59, 17 July 2023

BRBritish Rail or British Railways 'Dogfish' Ballast Hopper Wagons
BR 983115 20180603.jpg
BRBritish Rail or British Railways Dogfish DB983115 at Eardington, June 2018
Built By Chas Roberts (Wakefield)
Status Operational
Number DB983115
History
Built 1957
Diagram 1/587
Lot 2939
Type 4-wheel ballast hopper
Capacity 24 tons
Telegraphic code DOGFISH
TOPS code ZFV
Brakes Vacuum fitted, air through pipe (2022)
1996 Arrived on SVRSevern Valley Railway

Goods Wagons

DB9836115 is DOGFISH ballast hopper wagon. The SVRSevern Valley Railway was formerly home to three wagons of this type, although two have now left the Railway.

DOGFISH ballast wagons

In 1955 BRBritish Rail or British Railways adopted the 19-ton CATFISH as its first standard vacuum-fitted small steel ballast hopper wagon design. This had a single bottom door which only allowed stone discharge between the rails.[1] The 24-ton DOGFISH, which was introduced in the following year, was an enlarged version which was several inches taller and was fitted with both centre and side doors, allowing ballast to be dropped to either side of the rails as well as between them. The doors on the latter type were operated from three control wheels on a platform at one end of the wagon. The vacuum cylinder was mounted on the platform at the opposite end, next to which a hand wheel on the side of the wagon controlled the parking brake. The 4-wheel chassis had a 14 ft wheelbase and measured 22ft 6in over the headstocksThe underframe member across each end of a wagon carrying the buffers and coupling. Known as the Bufferbeam on a locomotive..[2]

The DOGFISH was the most numerous four-wheeled ballast hopper built for BRBritish Rail or British Railways, with a total of 1,249 completed under Diagram 1/587 in ten Lots between 1956 and 1959. Of those, Metro-Cammell built 559 in four Lots and Chas Roberts of Wakefield built 548 in three Lots (all three of the SRSouthern Railway's examples were built by Chas Roberts). The final 142 wagons were built in three Lots by BRBritish Rail or British Railways at Shildon. [3] All were vacuum fitted; there were certain design changes during construction although these did not warrant a new Diagram number. In particular, early examples had oil axle boxes while later examples came with OLEO buffers and roller bearings; those intended for BRBritish Rail or British Railways's Southern region were also fitted with longer side chutes to clear the third rail.[2].

In service they carried a variety of different liveries, beginning with all over Black, then 'Gulf Red' from 1960 to 1962. Olive green was used from around 1966 and grey from around 1983.

BRBritish Rail or British Railways Civil Engineers' wagons were commonly given 'fish' telegraph codes, with Dogfish being a general name describing various small sharks.[2]. When TOPS codes were introduced in the late 1960s they were allocated the code ZFV.

Service and Preservation

Details of the 3 Hopper Wagons are as follows:

Number Built Built by Lot Wagon Survey Notes
983115 1957 Chas Roberts 2939 Link Still resident
983194 1957 Chas Roberts 2939 Link Left 2018
993126 1956 Chas Roberts 2821 Link Left 2018

DB983115 was built in 1957 and initially allocated to Llynclys Junction (Llandu Quarries).[2]

Following the closure of the Burton Wagon Repair Department, DB 983115 arrived on the SVRSevern Valley Railway by road on 2 December 1996 having been selected for preservation by then-P. Way Department Supervisor Gerry Carter and purchased by Bridgnorth C&WCarriage & Wagon member John Briscoe.[4] MERMAID DB989098 was also acquired from Burton in the same manner and arrived the following day. Both were immediately put into use on Engineers' P-Way trains.[5]

Two further DOGFISH were later acquired by the SVRSevern Valley Railway for the same purpose.[note 1] These were DB983194 (initially allocated to Batts Combe Quarry, Cheddar on the Western Region)[2] and DB993126. The three photographs below show all three wagons in a ballast train at Bewdley in April 2015.

In 2017 SVR(H) acquired six SEACOW 40T ballast hoppers (five operational plus one spare). These were both larger than the DOGFISH and air-braked, potentially rendering the DOGFISH surplus to requirements. In January 2018 it was reported that two of the three had been sold/transferred to the Swanage Railway. The remaining privately-owned wagon, 983115, was photographed at Eardington in June 2018. In December 2022 it was fitted with a through pipe for air braking at Kidderminster Carriage Repair Works.

See also

Notes

  1. The date of arrival and prior history of the other two DOGFISH is uncertain. They were not listed in the 1998 Stock Book, but were photographed in use on the SVRSevern Valley Railway from around 2011 onwards.

References

  1. Larkin Vol 1 (2011), p.4.
  2. 2.0 2.1 2.2 2.3 2.4 Larkin Vol 1 (2011), pp.36-37.
  3. Rowland 1985), Appendix.4.
  4. SVRSevern Valley Railway News 122
  5. SVRSevern Valley Railway Stock Book Ninth Edition

Links